Every spring that is manufactured for our KNIGHT PROWLER Cams comes from PSI with wire that is made from the highest quality Chrome-Silicone alloys. The hard to find rod material for these alloys is 100% Kobe steel, long considered necessary to manufacture the cleanest, purest valve spring available in the world. KNIGHT PROWLER Valve Springs have an optional, proprietary, multi-step, surface enhancement process that has been proven to increase a spring’s endurance limit. This process can be applied to any level of the KNIGHT PROWLER series of springs. It is a very beneficial process for those looking for an increase in endurance while maintaining their existing setup.
MANDATORY USE FOR:
• WM8-4860 / BW-4V SPRINGS ONLY
• WM8-9960 / BW-4V SPRINGS ONLY
• WM8-9F60 / BW-4V SPRINGS ONLY
• WM8-6860 / BW-4V SPRINGS ONLY
RECOMMENDED FOR USE WITH:
• WM8-408
• WM8-999
• WM8-222
• WM8-777
| W160-PSW-10L | ||
|---|---|---|
OUTSIDE DIA. = 1.445 1.850 = 160 LBS 1.800 = 180 LBS 1.775 = 190 LBS 1.200 = 430 LBS 1.040 = COIL BIND | ||
| W188-1200-10L | ||
|---|---|---|
OUTSIDE DIA. = 1.475 1.850 = 200 LBS 1.825 = 210 LBS 1.800 = 220 LBS 1.200 = 450 LBS 1.020 = COIL BIND | ||
| W200-1200-10L | ||
|---|---|---|
Outside Dia. = 1.445 1.850 = 188lbs. 1.825 = 198lbs. 1.800 = 208lbs. 1.200 = 450lbs. 1.060 = Coil Bind | ||
| BW-4V | ||
|---|---|---|
1.585 = 84 LBS 1.535 = 113 LBS .985 = 260 LBS .925 = COIL BIND | ||